Laptops have replaced
the personal computers to a great extent, as they prove to be more user
friendly than the latter. The fact is that laptops do suffer from a lot of
issues, as compared to the personal computer. This owes to the fact that they
can be taken along with us wherever we go, unlike desktops. These gadgets have influenced
our lives so much that if they stopped working, we’d come to a standstill. When
your laptop shuts down right in the middle of a complicated process, the whole
experience is almost bound to get tiresome and irritating.
What to do if your laptop overheats
- The first step to take while doing computer repair is to clean the bottom ventilation openings with a can of compressed air. Shoot the air in short, fast bursts directly into the open spaces to clear the dust.
- Do not set your laptop on hard, solid surfaces. The best stand advised for your laptop is one with lots of vents so that air flows freely back and forth from the laptop bottom vents. You can also buy laptop trays or stands with built-in fans, which blow air up at the bottom of the laptop for further cooling. These trays operate on battery power or, for ease of use, plug directly into a USB port on your computer to run.
- Always take the battery out of the back of the laptop, and open the laptop up to get rid of internal dust buildup, which can be a major cause of the issue. If too much dust is inside the computer, the unit will overheat repeatedly, and even shut down on its own. Remove the hard drive and put it aside to protect it. You can also contact tech support to know more about computer repair.
- Turn the machine over and pry up the top strip over the keyboard with a small flat-head screwdriver. Now, lift the keyboard out and remove the tab that connects it to the laptop.
- The compressed airflow can be used to blow off the inner fan and all of the components. Once this is done, you can put the computer back together by reversing the same steps.
Therefore, you can follow these steps before contacting a technician. However, if you are not sure enough about performing them, the best option would be resorting to technical support.
No comments:
Post a Comment